Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
The stem elbow is a seamless push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
The stem elbow is a seamless push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
The stem elbow is a seamless push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the stop end fitting fully onto the pipe up to the pipe stop. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
The stop end fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the stop end fitting fully onto the pipe up to the pipe stop. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
The stop end fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the stop end fitting fully onto the pipe up to the pipe stop. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
The stop end fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit fitting equal straight connector from JG Speedfit for joining two pipes of the same size. Merely press the push-fit fitting onto the pipe, and lock it in place by clockwise rotating the plastic nut. To unlock the nut manually, push the collet towards the push-fit fitting's body, then pull the pipe to remove the connection.
The JG Speedfit equal straight connection push-fit fitting eliminates the need for hot works and tools, making it easier to use in confined spaces. It is also up to 40% faster to install than conventional methods. UK-based designers, manufacturers, and assemblers.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic straight tap connector for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic straight tap connector for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Push-fit plastic straight tap connector for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Experience the enhanced dual-action seal and increased rigidity with the Superseal pipe insert from Plumbco-online. Designed with two extra O-rings, this insert ensures secure connections between JG Speedfit pipes and push-fittings while maintaining the round shape of the pipe ends. Shop now for reliable pipe inserts that provide valuable support to your pipework.
Experience the superior sealing and increased rigidity with the Superseal pipe insert from Plumbco-online. With two additional O-rings, this insert ensures secure connections and maintains the round shape of JG Speedfit pipes when used with push-fittings. Shop now for reliable pipe inserts that provide extra support and preserve the integrity of your pipework.